CrazyModders - User contributions [en]

2g eclipse 95-99 GS,GST,GSX vs. RS water cooler compare

2025-09-07T18:43:20Z

CrazyModders:

Was in question to check what difference is from GS.... and GS water cooler did a pictures.
{| class="wikitable"
|+
!RS
!GS, GST, GSX
|-
|[[File:Eclipse 95 - 99 RS water cooler from top in car.jpg|alt=Eclipse 95 - 99 RS water cooler from top in car|thumb|Eclipse 95 - 99 RS water cooler from top in car]]
|[[File:Eclipse 95 - 99 GS waster cooler from top in car.jpg|alt=Eclipse 95 - 99 GS waster cooler from top in car|thumb|Eclipse 95 - 99 GS water cooler from top in car]]
|}

2g eclipse 95-99 GS,GST,GSX vs. RS water cooler compare

2025-08-15T08:26:49Z

CrazyModders: Created page with "Was in question to check what difference is from GS.... and GS water cooler did a pictures. {| class="wikitable" |+ !GS, GST, GSX !RS |- |File:Eclipse 95 - 99 RS water coole..."

Was in question to check what difference is from GS.... and GS water cooler did a pictures.
{| class="wikitable"
|+
!GS, GST, GSX
!RS
|-
|[[File:Eclipse 95 - 99 RS water cooler from top in car.jpg|alt=Eclipse 95 - 99 RS water cooler from top in car|thumb|Eclipse 95 - 99 RS water cooler from top in car]]
|[[File:Eclipse 95 - 99 GS waster cooler from top in car.jpg|alt=Eclipse 95 - 99 GS waster cooler from top in car|thumb|Eclipse 95 - 99 GS waster cooler from top in car]]
|}

File:Eclipse 95 - 99 GS waster cooler from top in car.jpg

2025-08-15T08:26:37Z

CrazyModders:

Eclipse 95 - 99 GS waster cooler from top in car

File:Eclipse 95 - 99 RS water cooler from top in car.jpg

2025-08-15T08:25:48Z

CrazyModders:

Eclipse 95 - 99 RS water cooler from top in car

MMC TPS Adjustment

2025-08-03T06:53:24Z

CrazyModders: Created page with "https://www.diytacra.com/2011/02/idle-switch.html https://auslancer.com/index.php?threads/diy-adjusting-your-tps-throttle-position-sensor.7391/"

https://www.diytacra.com/2011/02/idle-switch.html

https://auslancer.com/index.php?threads/diy-adjusting-your-tps-throttle-position-sensor.7391/

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-25T09:16:23Z

CrazyModders:

Idea is to use EVO ecu MN132750(MITSUBISHI LANCER EVOLUTION 8 VIII MR JAP OEM ECU) but i don't have 3 plugs hardness for it.
{| class="wikitable"
|+MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750 E6T34877 H
![[File:MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750.jpg|thumb|MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750|link=Special:FilePath/MITSUBISHI_LANCER_EVO_EVOLUTION_8_VIII_MR_JAP_OEM_ECU_MN132750.jpg]]
![[File:MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750 E6T34877 H.jpg|thumb|MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750 E6T34877 H|link=Special:FilePath/MITSUBISHI_LANCER_EVO_EVOLUTION_8_VIII_MR_JAP_OEM_ECU_MN132750_E6T34877_H.jpg]]
|}
Currently in progress of information collecting

evo ecu numbers:

https://www.lancerregister.com/threads/ecu-numbers.137115/

https://www.evolutionm.net/forums/ecu-flash/606224-ecu-board-number-ecu.html

https://codecard.eu/electronics/others/x1s-mitsubishi-ecu-ignition-ic-q46-q47-3-pcs-/prod_133.html

https://evoecu.logic.net/wiki/Plugs,_Pins,_and_Connectors

https://www.flickr.com/photos/edward_marshall/albums/72157620838565072 album of inside 3 4 plugs ecus

some info on sensors:

https://support.haltech.com/portal/en/kb/articles/4g63-engine

https://www.ecmtuning.com/wiki/sdsetup

forums about evo ecu on dsm

https://www.dsmtuners.com/threads/evo-8-ecu-in-2g-works.321515/

https://eatsleepdsmmag.com/using-an-evo-83g-eclipse-ecu-in-a-dsm/

https://www.ecmtuning.com/wiki/2ginevo8

https://www.evolutionm.net/forums/ecu-flash/436196-evo8-ecu-1g-dsm-works-25.html

https://www.dsmtuners.com/threads/evo-8-ecu-in-a-2g-your-visual-guide.347103/

https://www.dsmtuners.com/threads/97-gsx-blackbox-to-evo-8-ecu.531775/

https://dsmtech.forumotion.com/t28-evo-8-ecu-swap-into-a-2g

https://www.evolutionm.net/forums/ecu-flash/485591-evo-8-ecu-2g-dsm-don-t-start.html

pinout of 3 plug ecu:

https://evoecu.logic.net/wiki/USDM_IX_ECU_Pinout

Plugs stores:

https://www.ohm-racing.com/product/evo-9-ecu-connector-kit

lancer board :je331b52604b?
[[File:Je331b52604b mmc ecu board.jpg|left|thumb]]

https://www.elektroda.pl/rtvforum/topic3980431.html

https://www.google.com/search?client=firefox-b-d&q=je331b52604b

https://forum.injectorservice.com.ua/viewtopic.php?t=5275

TO eliminate MAF i will need :

Evo X MAP sensor 1865A052 E1T17771

Intake Air Temperature (IAT) sensor to work with evo ecu

 Flow of work progress:

Plugs:

 28 pin retainer clip, MX7-A-28S-RT

<nowiki>https://www.alibaba.com/product-detail/Electronic-Components-Supplier-MX7-A-28S_1600979488589.html</nowiki>

 <nowiki>http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=670-2312-ND</nowiki>

 28 pin plug, MX7-A-28SC (datasheet)

<nowiki>https://www.alibaba.com/product-detail/Agent-Service-MX7-A-28SC-28_1601398331177.html</nowiki>

 <nowiki>http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=670-2313-ND</nowiki>

 30 pin retainer clip, MX7-A-30S-RT

<nowiki>https://www.alibaba.com/product-detail/Offer-China-Agent-Service-MX7-A_1601401784493.htm</nowiki>

 <nowiki>http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=670-2314-ND</nowiki>

 30 pin plug, MX7-A-30SC (datasheet)

 <nowiki>http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=670-2315-ND</nowiki>

 35 pin retainer clip, MX7-A-35S-RT

<nowiki>https://www.alibaba.com/product-detail/Professional-BOM-List-MX7-A-35S_1601401697023.html</nowiki>

 <nowiki>http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=670-2316-ND</nowiki>

 35 pin plug, MX7-A-35SC (datasheet)

 <nowiki>http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=670-2317-ND</nowiki>

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-25T08:55:26Z

CrazyModders:

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-25T08:53:01Z

CrazyModders:

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-25T08:45:14Z

CrazyModders:

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-25T06:43:30Z

CrazyModders:

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-25T06:32:28Z

CrazyModders:

File:MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750 E6T34877 H.jpg

2025-07-25T06:31:41Z

CrazyModders:

MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750 E6T34877 H

File:MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750.jpg

2025-07-25T06:30:45Z

CrazyModders:

MITSUBISHI LANCER EVO EVOLUTION 8 VIII MR JAP OEM ECU MN132750

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-24T08:50:32Z

CrazyModders:

Currently in progress of information collecting

evo ecu numbers:

https://www.lancerregister.com/threads/ecu-numbers.137115/

https://www.evolutionm.net/forums/ecu-flash/606224-ecu-board-number-ecu.html

https://codecard.eu/electronics/others/x1s-mitsubishi-ecu-ignition-ic-q46-q47-3-pcs-/prod_133.html

some info on sensors:

https://support.haltech.com/portal/en/kb/articles/4g63-engine

forums about evo ecu on dsm

https://www.dsmtuners.com/threads/evo-8-ecu-in-2g-works.321515/

https://eatsleepdsmmag.com/using-an-evo-83g-eclipse-ecu-in-a-dsm/

https://www.ecmtuning.com/wiki/2ginevo8

https://www.evolutionm.net/forums/ecu-flash/436196-evo8-ecu-1g-dsm-works-25.html

https://www.dsmtuners.com/threads/evo-8-ecu-in-a-2g-your-visual-guide.347103/

https://www.dsmtuners.com/threads/97-gsx-blackbox-to-evo-8-ecu.531775/

https://dsmtech.forumotion.com/t28-evo-8-ecu-swap-into-a-2g

https://www.evolutionm.net/forums/ecu-flash/485591-evo-8-ecu-2g-dsm-don-t-start.html

lancer board :je331b52604b?
[[File:Je331b52604b mmc ecu board.jpg|left|thumb]]

https://www.elektroda.pl/rtvforum/topic3980431.html

https://www.google.com/search?client=firefox-b-d&q=je331b52604b

https://forum.injectorservice.com.ua/viewtopic.php?t=5275

TO eliminate MAF i will need :

Evo X MAP sensor ?

Intake Air Temperature (IAT) sensor to work with evo ecu

2G Eclipse 95-99 ECU swap to EVO ECU -MAF

2025-07-24T08:40:44Z

CrazyModders: Created page with "Currently in progress of information collecting evo ecu numbers: https://www.lancerregister.com/threads/ecu-numbers.137115/ https://www.evolutionm.net/forums/ecu-flash/6..."

File:Je331b52604b mmc ecu board.jpg

2025-07-24T08:40:12Z

CrazyModders:

je331b52604b mmc ecu board

Gen1 MIVEC parts for full swap

2025-06-28T09:02:43Z

CrazyModders: new

Here i will try to list all parts needed to swap any 4g91 displacement of 1.5 L (1,496 cc), ''4G92'' displaces 1.6 L (1,597 cc) or 4G93 is a 1.8 L (1,834 cc) engine of gen1 to mivec head.

Table shows part name in first column, then engine model and comment if that part is needed or not.
{| class="wikitable"
|+Comparison table of parts needed to to swap gen1 mivec head(started from top of engine to bottom of it)
!Part name
!4g91 1.5 L (1,496 cc)[DOHC]
!''4G92'' 1.6 L (1,597 cc)[SOHC]
!''4G92'' 1.6 L (1,597 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[SOHC]
!Pic of part
|-
|Head assembly that will exclude both cams gears,
means that head is assembled from 3 peaces,

lower part in full, top part in full,

with all internal bolts nuts etc. all in place,

mounted with valve cover on top with all needed bolts seals etc.
|Yes
|Yes
|Yes
|Yes
|Yes
|[[File:Mivec head of gen1 without cam gears.jpg|thumb]]
|-
|Cam gears
|No - as it uses same cam gears
as mivec
|Yes
|No
|No
|Yes
|[[File:Cam gears that are same on gen1 4g9x dohc series engines.jpg|thumb]]
|-
!Part name
!4g91 1.5 L (1,496 cc)[DOHC]
!''4G92'' 1.6 L (1,597 cc)[SOHC]
!''4G92'' 1.6 L (1,597 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[SOHC]
!Pic of part
|-
|CAS - cam angle sensor
|Yes
|Yes
|No - as it uses same
CAS as mivec
|No
|Yes
|[[File:4gx gen1 series CAS sensor.jpg|thumb]]
|-
|Intake manifold in full assembly - means it has everything
what is mounted on it.
|Yes
|Yes
|Yes
|Yes
|Yes
|[[File:4G92 DOHC MIVEC gen1 intake manifold with TB from top.jpg|thumb|This one just missing full rail and injectors ]]
|-
|Exhaust manifold
|Yes
|Yes
|Yes
|Yes
|Yes
|[[File:4g92 mivec exhaust manifold 4-2 part without heat cover.jpg|thumb]]
|-
!Part name
!4g91 1.5 L (1,496 cc)[DOHC]
!''4G92'' 1.6 L (1,597 cc)[SOHC]
!''4G92'' 1.6 L (1,597 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[SOHC]
!Pic of part
|-
|Plastic mivec brand cover, or Mivec-MD cover
|Yes
|Yes
|Yes
|Yes
|Yes
|[[File:4g92 dohc mivec engine covers.jpg|thumb|215x215px]]
|-
|Top part of timing belt cover
|No - all doch covers of gen1
seems same
|Yes
|No
|No
|Yes
|[[File:4g9x gen1 dohc series TOP timing belt cover.jpg|thumb|172x172px]]
|-
!Part name
!4g91 1.5 L (1,496 cc)[DOHC]
!''4G92'' 1.6 L (1,597 cc)[SOHC]
!''4G92'' 1.6 L (1,597 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[SOHC]
!Pic of part
|-
|Lower part of timing belt cover
|No - all doch covers of gen1
seems same
|Yes
|No
|No
|Yes
|[[File:4g9x gen1 dohc series LOWER timing belt cover.jpg|thumb|149x149px]]
|-
|Oil pump housing, with all pulleys,
hydraulic belt tensioner with all realted parts to it etc.
|No - It uses same principles
of lower parts of timing belt lower part
|Yes
|No
|No
|Yes
|[[File:4g9x DOHC gen1 lower timing belt view under belt cover.jpg|thumb|213x213px]]
|}

After all this list you might have all parts exluding electronic and management of engine.
{| class="wikitable"
|+Electrical parts needed for mivec head swap
!Part name
!4g91 1.5 L (1,496 cc)[DOHC]
!''4G92'' 1.6 L (1,597 cc)[SOHC]
!''4G92'' 1.6 L (1,597 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[SOHC]
!Pic of part
|-
|ECU with codes:
Mivec silvertop ecu - 4828

Mivec blacktop ecu - 7035

mivec silvertop MD ecu - 4829

mivec blacktop MD ecu -7036

Mivec Japan ralliart ecu - 2910

mivec hongkong ralliart - 2264
|Yes
|Yes
|Yes
|Yes
|Yes
|[[File:Gen 1 mivec ecu 7035 and 4828.jpg|thumb|167x167px]][[File:Ecu loom of mivec.jpg|thumb|151x151px]]
|-
|Wiring loom of engine control
|Yes
|Yes
|Yes
|Yes
|Yes
|[[File:4g92 mivec engine wiring loom with 4828 ecu.jpg|thumb]]
|-
!Part name
!4g91 1.5 L (1,496 cc)[DOHC]
!''4G92'' 1.6 L (1,597 cc)[SOHC]
!''4G92'' 1.6 L (1,597 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[DOHC]
!4G93 1.8 L (1,834 cc)[SOHC]
!Pic of part
|-
|Dash cluster
|Yes
|Yes
|No - even it's only 9k/rpm
gauge it will work with mivec
|No
|Yes
|[[File:Order of 10k rpm cluster.jpg|thumb|190x190px]] 
|}
I think i have covered all needed parts for mivec head swap, it's also called topset mivec.

File:4g92 mivec engine wiring loom with 4828 ecu.jpg

2025-06-28T08:53:22Z

CrazyModders:

4g92 mivec engine wiring loom with 4828 ecu

File:Gen 1 mivec ecu 7035 and 4828.jpg

2025-06-28T08:51:31Z

CrazyModders:

Gen 1 mivec ecu 7035 and 4828

File:4g9x DOHC gen1 lower timing belt view under belt cover.jpg

2025-06-28T08:39:52Z

CrazyModders:

4g9x DOHC gen1 lower timing belt view under belt cover

File:4g9x gen1 dohc series LOWER timing belt cover.jpg

2025-06-28T08:36:42Z

CrazyModders:

4g9x gen1 dohc series LOWER timing belt cover

File:4g9x gen1 dohc series TOP timing belt cover.jpg

2025-06-28T08:33:16Z

CrazyModders:

4g9x gen1 dohc series TOP timing belt cover

File:4g92 mivec exhaust manifold 4-2 part without heat cover.jpg

2025-06-28T08:21:56Z

CrazyModders:

4g92 mivec exhaust manifold 4-2 part without heat cover

File:4gx gen1 series CAS sensor.jpg

2025-06-28T08:17:16Z

CrazyModders:

4gx gen1 series CAS sensor

File:Cam gears that are same on gen1 4g9x dohc series engines.jpg

2025-06-28T08:11:55Z

CrazyModders:

Cam gears that are same on gen1 4g9x dohc series engines

File:Mivec head of gen1 without cam gears.jpg

2025-06-28T08:06:35Z

CrazyModders:

Mivec head of gen1 without cam gears

Gen1 4g92 4g93 intake manifold compare

2025-06-28T07:43:17Z

CrazyModders:

Got chance to compare [[Gen1 Mitsubishi 4G9 engine|Gen1]] '''4G92P SOHC 16 Valve''' intake manifold with '''4G93 DOHC 16 Valve MPI''' intake manifold

have '''4G92-MIVEC DOHC 16 Valve''' also to add to compare

And on OEM intake of 93 has few millimeter bigger TB hole that 92 sohc engine. And TB compared is also have few millimeters bigger TB hole from IN side.
{| class="wikitable"
|+What is visually seen that 93 has way bigger runners then 92
!Back side of DOHC and SOHC intake manifolds[[File:4g93 and 4g92 intakes manifold from back.jpg|alt=4g93 and 4g92 intakes manifold from back|thumb|4g93 and 4g92 intakes manifold from back, and visually seen that GTI(4G93 DOHC) intake has bigger runners.]]
!TB side of DOHC and SOHC intake manifolds[[File:4g93 and 4g92 intake manifold from TB side.jpg|thumb|As seen on right SOHC manifold has TB hole bored for EVO1-3,Galant,Eclipse,Mivec etc. TB]]
!MIVEC Gen1 intake manifold[[File:4G92 MIVEC DOHC intake manifold top.jpg|thumb|As seen this manifold has bigger runners looks same size as GTI one, and has extra 2 sensor holes, one to injectors side other in back.]]
!MIVEC Gen1 intake manifold with partly assembly[[File:4G92 DOHC MIVEC gen1 intake manifold with TB from top.jpg|thumb|From top seen mentioned sensors, this picture shows intake just without full rail and injectors, but all in place, TB, engine hanger bracket, ignition module, ignition coil etc. ]]
|}

File:4G92 DOHC MIVEC gen1 intake manifold with TB from top.jpg

2025-06-28T07:38:35Z

CrazyModders:

4G92 DOHC MIVEC gen1 intake manifold with TB from top

Gen1 4g92 4g93 intake manifold compare

2025-06-28T07:36:18Z

CrazyModders:

File:4G92 MIVEC DOHC intake manifold top.jpg

2025-06-28T07:33:36Z

CrazyModders:

4G92 MIVEC DOHC intake manifold view from top

Gen1 4g92 4g93 intake manifold compare

2025-06-28T07:30:46Z

CrazyModders:

File:4g93 and 4g92 intake manifold from TB side.jpg

2025-06-28T07:26:20Z

CrazyModders:

4g93 and 4g92 intake manifolds, from TB (Throttle Body) side

LSD on W5M31, W5M33, F5M2x, F5M3x and F5M42

2025-06-17T14:01:32Z

CrazyModders:

'''LSD''' helps prevent wheel spin by limiting the speed difference between left and right wheels, improving traction in high-performance or low-grip situations.

=== 🔧 1. Clutch-Type LSD ===

* '''How it works''': Uses clutch plates to transfer torque between wheels.
* '''Pros''': Great traction, adjustable preload/tuning, ideal for racing/drifting.
* '''Cons''': Can wear over time, needs maintenance (friction plates).
* '''Feel''': Aggressive locking during corner exit and hard acceleration.

=== 🔩 2. Torsen (Torque-Sensing) LSD ===

* '''How it works''': Uses helical gears to sense torque difference and shift power.
* '''Pros''': Smooth operation, no clutch plates to wear, maintenance-free.
* '''Cons''': Less effective when one wheel loses all traction (e.g., airborne).
* '''Feel''': Natural and progressive torque transfer, good for street/track.

=== ⚙️ 3. Open Differential (for comparison) ===

* '''How it works''': Sends power to the wheel with least resistance.
* '''Cons''': Poor traction under hard acceleration or uneven grip (wheel spin).

So i did some OEM catalogues research on open diffs that all those boxes uses same open diff

Info taken of:

https://www.4gtuner.com/threads/running-evo-lsd-in-fwd-box.21852/

And also my experience that the information is correct, by my own practice.

LSD on W5M31, W5M33, F5M2x, F5M3x and F5M42

2025-06-17T13:57:08Z

CrazyModders: Created page with "Info taken of: https://www.4gtuner.com/threads/running-evo-lsd-in-fwd-box.21852/ And also my experience that the information is correct, by my own practice."

Info taken of:

https://www.4gtuner.com/threads/running-evo-lsd-in-fwd-box.21852/

And also my experience that the information is correct, by my own practice.

MD113178

2024-12-23T15:59:25Z

CrazyModders:

=GASKET,CYLINDER HEAD=

==Genuine Mitsubishi (MD113178)==

Supplier: VICTOR REINZ Supplier codein TECDOC: 61-52472-00

Supplier: GLASER Article code in TECDOC: h80925-00

Supplier: NIPPARTS Article code in TECDOC: j1255006

Supplier: AJUSA Article code in TECDOC: 10078800 Product line: FIBERMAX Thickness [mm]: 1,4

Supplier: CORTECO Article code in TECDOC: 414223p

Supplier: CORTECO Article code in TECDOC: 414137p

Supplier: ELRING Article code in TECDOC: 920.517

Supplier: HERTH+BUSS JAKOPARTS Article code in TECDOC: J1250528 Thickness [mm]: 1,6

Supplier: BGA Article code in TECDOC: CH9381 Thickness [mm]: 1,4

Supplier: PAYEN Article code in TECDOC: BS240 Gasket Design: Graphite Composite

G4CN Cylinder Head Gasket

MD113178 10078800 22311-33000 22311-33010 22311-33410 for

Mitsubishi LANCER 4G67 OR MIRAGE 4G61 HYUNDAI LANTRA 16V

ENGINE: 4G67 4G61 4G61T G4CN G4CR

MODEL Displacement ENGINE YEAR

FOR EAGLE SUMMIT 16V 1596CC 4G61 1989-1990

FOR MITSUBISHI COLT 16V 1836CC 4G67 1989-1992

FOR MITSUBISHI LANCER 16V 1836CC 4G67 1989-1992

FOR MITSUBISHI COLT 16V 1596CC 4G61 1988-1989

FOR MITSUBISHI LANCER 16V 1596CC 4G61 1988-1989

FOR MITSUBISHI LANCER TURBO 16V 1596CC 4G61T 1988-

FOR MITSUBISHI MIRAGE TURBO 16V 1596CC 4G61T 1989-

FOR MITSUBISHI MIRAGE 16V 1596CC 4G61 1991-1992

FOR HYUNDAI LANTRA 16V 1836CC G4CN 1993-1995

FOR HYUNDAI ELANTRA 16V 1836CC G4CN 1993-1995

FOR HYUNDAI LANTRA 16V 1595CC G4CR 1993-1995

FOR HYUNDAI ELANTRA 16V 1595CC G4CR 1993-1995

FOR HYUNDAI LANTRA 16V 1595CC G4CR 1990-1992

FOR HYUNDAI ELANTRA 16V 1595CC G4CR 1990-1992

FOR HYUNDAI LANTRA 16V 1836CC G4CN 1992-1993

FOR HYUNDAI ELANTRA 16V 1836CC G4CN 1992-1993

FOR CHRYSLER SUMMIT 16V 1596CC 4G61 1989-1990

FOR CHRYSLER SUMMIT TURBO 16V 1596CC 4G61 1989-1990

HEAD GASKET :MD113178 10078800

cylinder diameter:Ø83.5MM

GEN1 4G92-MIVEC DOHC 16 Valve Engine

2024-12-23T15:49:55Z

CrazyModders: Created page with "'''4G92-MIVEC DOHC 16 Valve (1991-1995)''' * Total Displacement - 1.6 L (1,597 cc) * Bore - 81 mm (3.19 in) * Stroke - 77.5 mm (3.05 in) * Compression Ratio - 11.0:1 * Maximu..."

'''4G92-MIVEC DOHC 16 Valve (1991-1995)'''

* Total Displacement - 1.6 L (1,597 cc)
* Bore - 81 mm (3.19 in)
* Stroke - 77.5 mm (3.05 in)
* Compression Ratio - 11.0:1
* Maximum Output - 125 kW (170 PS; 168 bhp[silver top]) at 7,500 rpm [196 bhp black top mivec]
* Maximum Torque - 167 N⋅m (123 lb⋅ft) at 7,000 rpm

'''Applications (MIVEC)'''

* Mitsubishi Lancer (sedan '''CB4A''') 1992–1995
* Mitsubishi Colt ('''CA4A''') 1992–1995
* Mitsubishi Mirage ('''CA4A/CB4A''') 1991–1995

 
[[File:4g92 dohc mivec engine bay.jpg|left|thumb|#1 of own/ed MIVEC's]][[File:Gen1 4g92 dohc mivec engine parts.jpg|center|thumb|#2 of own/ed MIVEC's]]

File:Gen1 4g92 dohc mivec engine parts.jpg

2024-12-23T15:48:04Z

CrazyModders:

engine parts

File:4g92 dohc mivec engine bay.jpg

2024-12-23T15:42:16Z

CrazyModders:

Black top Gen1 mivec engine in engine bay.

MD113178

2024-12-23T15:21:38Z

CrazyModders: Created page with "= GASKET,CYLINDER HEAD = == Genuine Mitsubishi (MD113178) == G4CN Cylinder Head Gasket MD113178 10078800 for Mitsubishi LANCER 4G67 OR MIRAGE 4G61 HY..."

= GASKET,CYLINDER HEAD =

== Genuine Mitsubishi (MD113178) ==

G4CN Cylinder Head Gasket

MD113178 10078800 for

Mitsubishi LANCER 4G67 OR MIRAGE 4G61 HYUNDAI LANTRA 16V

ENGINE: 4G67 4G61 4G61T G4CN G4CR

MODEL Displacement ENGINE YEAR

FOR EAGLE SUMMIT 16V 1596CC 4G61 1989-1990

FOR MITSUBISHI COLT 16V 1836CC 4G67 1989-1992

FOR MITSUBISHI LANCER 16V 1836CC 4G67 1989-1992

FOR MITSUBISHI COLT 16V 1596CC 4G61 1988-1989

FOR MITSUBISHI LANCER 16V 1596CC 4G61 1988-1989

FOR MITSUBISHI LANCER TURBO 16V 1596CC 4G61T 1988-

FOR MITSUBISHI MIRAGE TURBO 16V 1596CC 4G61T 1989-

FOR MITSUBISHI MIRAGE 16V 1596CC 4G61 1991-1992

FOR HYUNDAI LANTRA 16V 1836CC G4CN 1993-1995

FOR HYUNDAI ELANTRA 16V 1836CC G4CN 1993-1995

FOR HYUNDAI LANTRA 16V 1595CC G4CR 1993-1995

FOR HYUNDAI ELANTRA 16V 1595CC G4CR 1993-1995

FOR HYUNDAI LANTRA 16V 1595CC G4CR 1990-1992

FOR HYUNDAI ELANTRA 16V 1595CC G4CR 1990-1992

FOR HYUNDAI LANTRA 16V 1836CC G4CN 1992-1993

FOR HYUNDAI ELANTRA 16V 1836CC G4CN 1992-1993

FOR CHRYSLER SUMMIT 16V 1596CC 4G61 1989-1990

FOR CHRYSLER SUMMIT TURBO 16V 1596CC 4G61 1989-1990

HEAD GASKET :MD113178 10078800

cylinder diameter:Ø83.5MM

MD180936 DISTRIBUTOR

2023-09-22T07:20:28Z

CrazyModders: Created page with "MD180936 DISTRIBUTOR ASSY 1,6 MD618559 1,3 ? <nowiki>**************</nowiki> babina *************** STARK SKCO-0070157 Ignition Coil 12V ASHIKA 78-05-522 Ignition Coil..."

MD180936 DISTRIBUTOR ASSY 1,6

MD618559 1,3 ?

<nowiki>**************</nowiki> babina ***************

STARK SKCO-0070157 Ignition Coil 12V

ASHIKA 78-05-522 Ignition Coil

ERA 880288A Ignition Coil 3-pin connector

ERA 880288 Ignition Coil

JAPANPARTS BO-522 Ignition Coil

RIDEX 689C0143 Ignition Coil 12V

HITACHI 138844 Ignition Coil

 BREMI: 20437

 EFI AUTOMOTIVE: 155 284

 ASHUKI by Palidium: C85004

 ERA: 880 289, 880288

 FISPA: 8530499

 HOFFER: 8010749

 JANMOR: JM5197

 LUO'S: L620503

 MEAT & DORIA: 10749

 MOBILETRON: CF11

 NGK: 48090

 SIDAT: 8530499

 HITACHI: 138844

 LUO'S: L62 0503

 DIAMOND: F-696

 NGK: U1011

 HYUNDAI - KIA - OE-KK1371810XB

 HYUNDAI - KIA - OE-KK1371810XC

 MAZDA - OE-0K2011810XB

 MAZDA - OE-0K2011810XC

 MAZDA - OE-K2011810XC

 MAZDA - OE-OK2011810XB

 MITSUBISHI - OE-F696

 MITSUBISHI - OE-H3T024

 MAZDA - OE-K201-18-10XC

 MAZDA - OE-OK201-18-10XB

MITSUBISHI

 MITSUBISHI Colt IV (CA0) (Year of Construction 03.1992 - 04.1996)

 MITSUBISHI Colt V (CJ0) (Year of Construction 09.1995 - 09.2003)

 MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) (Year of Construction 09.1991 - 12.1996)

 MITSUBISHI Carisma Hatchback (DA2A, DAO) (Year of Construction 07.1995 - 06.2006)

 MITSUBISHI Lancer VI Saloon (CJ_, CP_) (Year of Construction 09.1995 - 08.2003)

 MITSUBISHI Lancer IV Hatchback (C6_A, C7_A) (Year of Construction 04.1988 - 05.1994)

KIA

 KIA Sephia / Mentor I Saloon (FA) (Year of Construction 01.1992 - 09.2001)

MITSUBISHI Lancer CB4W; CD4W; CB5W; CD5W; N11W; N21W; N21WG 1.6; 1.8 4G92; 4G93 MD618559; ; MD367870; ; ;

MD619291 korpusas

MD338992 kažkoks aukstas labai <nowiki>https://ultra-automotive.co.uk/distributor-new-proton-persona-wira-t2t58272-md328420/</nowiki>

<nowiki>***************</nowiki> komutatorius*********************

MOBILETRON IG-M023

MITSUBISHI J862

MITSUBISHI T6T58071

MITSUBISHI T6T58471

MITSUBISHI

J862

J852

T6T58071

T6T57671

T6T57171

T6T58271

Crank Angle Sensor J862

TIS208 TIS-208 <nowiki>https://www.ignition.com.tw/en/product/Crank-Angle-Sensor_TIS208.html</nowiki>

J862 ignition module J852 T6T58071 T6T57671

MOBILETRON

IG-M022 <nowiki>http://spectromatic.net/product/41487/j862-ignition-module-j852-t6t58071-t6t57671-mitsubishi-lancer-colt.html</nowiki>

<nowiki>https://www.alibaba.com/product-detail/Petrol-Engine-Ignition-Module-OEM-J862_60819938870.html</nowiki>

<nowiki>https://www.daytonagblimited.co.uk/product/mitsubishi-ignition-module-lancer-galant-colt-j862/</nowiki>

Vehicle Year CC Engine Code

MITSUBISHI - LANCER IV (C6 A, C7 A) 1.6 GLi 16V (C66A) Petrol Engine 06/92 to 05/94 1597 4G92

MITSUBISHI - COLT IV (CA A) 1.6 GLXi 16V (CA4A) Petrol Engine 04/92 to 04/96 1597 4G92

MITSUBISHI - SPACE WAGON (N3 W, N4 W) 1.8 (N31W) Petrol Engine 10/91 to 10/98 1834 4G93

MITSUBISHI - SPACE RUNNER (N1 W, N2 W) 1.8 (N11W) Petrol Engine 10/91 to 08/99 1834 4G93

MITSUBISHI - SPACE RUNNER (N1 W, N2 W) 1.8 4x4 (N21W) Petrol Engine 10/91 to 08/99 1834 4G93

MITSUBISHI - SPACE WAGON (N3 W, N4 W) 1.8 4x4 (N41W) Petrol Engine 10/91 to 10/98 1834 4G93

MITSUBISHI - SPACE WAGON (N3 W, N4 W) 2.0 GLXi (N33W) Petrol Engine 10/92 to 10/98 1997 4G63

MITSUBISHI - SPACE WAGON (N3 W, N4 W) 2.0 GLXi 4x4 (N43W) Petrol Engine 10/92 to 10/98 1997 4G63

MITSUBISHI - GALANT V SALOON (E5 A, E7 A, E8 A) 1.8 GLSI (E52A) Petrol Engine 11/92 to 08/96 1834 4G93

MITSUBISHI - GALANT V SALOON (E5 A, E7 A, E8 A) 2.0 GLSI (E55A) Petrol Engine 11/92 to 08/96 1997 4G63

Vehicle Year CC Engine Code

MITSUBISHI – LANCER IV (C6 A, C7 A) 1.6 GLi 16V (C66A) Petrol Engine 06/92 to 05/94 1597 4G92

MITSUBISHI – COLT IV (CA A) 1.6 GLXi 16V (CA4A) Petrol Engine 04/92 to 04/96 1597 4G92

MITSUBISHI – SPACE WAGON (N3 W, N4 W) 1.8 (N31W) Petrol Engine 10/91 to 10/98 1834 4G93

MITSUBISHI – SPACE RUNNER (N1 W, N2 W) 1.8 (N11W) Petrol Engine 10/91 to 08/99 1834 4G93

MITSUBISHI – SPACE RUNNER (N1 W, N2 W) 1.8 4×4 (N21W) Petrol Engine 10/91 to 08/99 1834 4G93

MITSUBISHI – SPACE WAGON (N3 W, N4 W) 1.8 4×4 (N41W) Petrol Engine 10/91 to 10/98 1834 4G93

MITSUBISHI – SPACE WAGON (N3 W, N4 W) 2.0 GLXi (N33W) Petrol Engine 10/92 to 10/98 1997 4G63

MITSUBISHI – SPACE WAGON (N3 W, N4 W) 2.0 GLXi 4×4 (N43W) Petrol Engine 10/92 to 10/98 1997 4G63

MITSUBISHI – GALANT V SALOON (E5 A, E7 A, E8 A) 1.8 GLSI (E52A) Petrol Engine 11/92 to 08/96 1834 4G93

MITSUBISHI – GALANT V SALOON (E5 A, E7 A, E8 A) 2.0 GLSI (E55A) Petrol Engine 11/92 to 08/96 1997 4G63

MITSUBISHI – GALANT V (E5 A, E7 A, E8 A) 1.8 GLSI (E52A) Petrol Engine 11/92 to 08/96 1834 4G93

MITSUBISHI – GALANT V (E5 A, E7 A, E8 A) 2.0 GLSI (E55A) Petrol Engine 11/92 to 08/96 1997 4G63

MITSUBISHI – GALANT V (E5 A, E7 A, E8 A) 2.0 GLSI 4×4 (E75A) Petrol Engine 11/92 to 08/96 1997 4G63

MAZDA – MX-6 (GE6) 2.0 Petrol Engine 02/92 to 1991 FS

MAZDA – 626 IV (GE) 1.8 i Petrol Engine 01/92 to 04/97 1840 FP

MAZDA – 626 IV (GE) 2.0 i Petrol Engine 01/92 to 04/97 1991 FS

MAZDA – 626 IV HATCHBACK (GE) 1.8 Petrol Engine 08/91 to 04/97 1840 FP

MAZDA – 626 IV HATCHBACK (GE) 2.0 i Petrol Engine 08/91 to 04/97 1991 FS

MAZDA – 626 IV (GE) 1.8 i Petrol Engine 08/94 to 04/97 1840 —

MAZDA – 626 IV HATCHBACK (GE) 1.8 Petrol Engine 08/94 to 04/97 1840 —

MITSUBISHI – LANCER V STATION WAGON (CB W, CD W) 1.6 GLXi 16V (CB4W) Petrol Engine 12/92 to 10/03 1597 4G92

MITSUBISHI – LANCER V STATION WAGON (CB W, CD W) 1.6 GLXi 16V 4WD (CD4W) Petrol Engine 12/92 to 10/03 1597 4G92

PROTON – PERSONA HATCHBACK 1.3 GLSi Petrol Engine 01/94 to 1299 4G13

PROTON – PERSONA HATCHBACK 1.5 GLi/GLSi Petrol Engine 01/94 to 1468 4G15

CHRYSLER – STRATUS (JA) 2.5 LX V6 Petrol Engine 12/95 to 04/01 2497 H00

PROTON – PERSONA 1.3i Petrol Engine 03/96 to 1299 G13B

PROTON – PERSONA 1.5 GLi/GLSi Petrol Engine 03/96 to 1468 —

PROTON – PERSONA 1.5 GLSi Petrol Engine 09/96 to 1468 G15B

MAZDA – 626 IV (GE) 2.0 i 4WD Petrol Engine 04/92 to 04/97 1991 FS

MAZDA – 626 IV HATCHBACK (GE) 2.0 i 4WD Petrol Engine 04/92 to 04/97 1991 FS

PROTON – SALOON SALOON 1.5 Petrol Engine 01/91 to 11/96 1468 —

PROTON – AEROBACK HATCHBACK 1.5 Petrol Engine 01/89 to 11/96 1468 —

PROTON – WIRA HATCHBACK 1.3 Petrol Engine 08/00 to 1298 —

PROTON – GEN 2 1.3 Petrol Engine 06/04 to 1332 —

PROTON – GEN 2 1.6 Petrol Engine 06/04 to 1597 S4PH

m67580 transiztorius

<nowiki>https://www.datasheetcafe.com/m67580-transistor-mitsubishi/</nowiki>

<nowiki>*************</nowiki> skriejikas, rotorius, skirstytuvas ******************

MD618556 MITSUBISHI

MD619273 MITSUBISHI

MD618556 PROTON

MD619273 PROTON

Markė Modelis Gaminama Variklis

MITSUBISHI LANCER IV hečbekas (C6_A, C7_A) 1992-06 - 1994-05 83 kW, 113 hp

MITSUBISHI COLT IV (CA_A) 1992-04 - 1996-04 83 kW, 113 hp

MITSUBISHI SPACE WAGON (N3_W, N4_W) 1991-10 - 1998-10 90 kW, 122 hp

MITSUBISHI SPACE RUNNER autobusiukas (N1_W, N2_W) 1991-10 - 1999-08 90 kW, 122 hp

MITSUBISHI SPACE RUNNER autobusiukas (N1_W, N2_W) 1991-10 - 1999-08 90 kW, 122 hp

MITSUBISHI SPACE WAGON (N3_W, N4_W) 1991-10 - 1998-10 90 kW, 122 hp

MITSUBISHI SPACE WAGON (N3_W, N4_W) 1992-10 - 1998-10 98 kW, 133 hp

MITSUBISHI SPACE WAGON (N3_W, N4_W) 1992-10 - 1998-10 98 kW, 133 hp

Variklio kodas: 4G63 (SOHC 16V); Gamybos metai iki: 1996-05; Bloko atskyrimas: null; Variklio kodas: 4G63 (SOHC 16V)

MITSUBISHI GALANT VII sedanas (E5_A, E7_A, E8_A) 1992-11 - 1996-08 93 kW, 126 hp

MITSUBISHI GALANT VII (E5_A, E7_A, E8_A) 1992-11 - 1996-08 93 kW, 126 hp

MITSUBISHI LANCER V (CB_A, CD_A, CE_A) 1992-06 - 1996-12 83 kW, 113 hp

MITSUBISHI GALANT VII sedanas (E5_A, E7_A, E8_A) 1994-02 - 1996-08 85 kW, 116 hp

MITSUBISHI GALANT VII (E5_A, E7_A, E8_A) 1994-02 - 1996-08 85 kW, 116 hp

MITSUBISHI COLT IV (CA_A) 1994-02 - 1996-04 66 kW, 90 hp

MITSUBISHI LANCER V (CB_A, CD_A, CE_A) 1994-02 - 1996-12 66 kW, 90 hp

MITSUBISHI LANCER V Station Wagon (CB_W, CD_W) 1992-12 - 2003-10 83 kW, 113 hp

MITSUBISHI LANCER V Station Wagon (CB_W, CD_W) 1992-12 - 2003-10 83 kW, 113 hp

MITSUBISHI LANCER V (CB_A, CD_A, CE_A) 1992-06 - 1996-12 83 kW, 113 hp

MITSUBISHI SPACE RUNNER autobusiukas (N1_W, N2_W) 1996-06 - 1999-08 85 kW, 116 hp

MITSUBISHI SPACE RUNNER autobusiukas (N1_W, N2_W) 1996-06 - 1999-08 85 kW, 116 hp

MITSUBISHI GALANT VII sedanas (E5_A, E7_A, E8_A) 1992-11 - 1996-08 100 kW, 136 hp

Gamybos metai iki: 1992-12

Markė Modelis Gaminama Variklis

PROTON PERSONA 400 (C9_S) 1994-01 - 2000-07 66 kW, 90 hp

PROTON PERSONA 400 (C9_S) 1994-01 - 2000-07 83 kW, 113 hp

PROTON PERSONA 300 (C9_M) 1996-03 - 2000-07 66 kW, 90 hp

PROTON PERSONA 300 (C9_M) 1996-03 - 2000-07 83 kW, 113 hp

PROTON PERSONA 300 (C9_M) 1996-09 - 2000-07 64 kW, 87 hp

Mitsubishi Manuals

2023-02-22T18:45:25Z

CrazyModders:

This is the sources that i use for manuals when i need info

http://www.lilevo.com/mirage/

http://mmc-manuals.ru/Old_Mitsubishi_Cars

https://w4a33.com/csm/

http://jdmfsm.info/Auto/Japan/Mitsubishi/

http://4g61t.org/archive/Manuals/

https://tech.mirage-performance.com/

https://zinref.ru/avtomobili/Mitsubishi/000.htm

https://evoscan.com/tech-articles/

Later on planing to host all what i will find on this my moderated wiki with online pdf viewer

other links:

https://www.evoscan.com/technical-vehicle-manuals/150-mitsubishi-ecu-numbers

Forums:

http://www.mivec.co.nz/forums/index.php

https://www.zerotohundred.com/forums/

How to Install a 60mm Throttle Body on the 4g92/3

2023-02-22T18:03:15Z

CrazyModders: Created page with "This page is related to : https://tech.mirage-performance.com/60mmthrottlebody.html I have done same what is done there. {| class="wikitable" |+ ! |- |File:MD614406 vs MD61..."

This page is related to : https://tech.mirage-performance.com/60mmthrottlebody.html

I have done same what is done there.
{| class="wikitable"
|+
!
|-
|[[File:MD614406 vs MD614530 compare .jpg|alt=compare of MD614406 vs MD614530 |thumb|MD614406 vs MD614530 compare ]]
|-
|[[File:MD614584 MD614691 with MD614361.jpg|alt=MD614584 MD614691 with MD614361|thumb|MD614584 MD614691 with MD614361]]
|-
|
|}

File:MD614584 MD614691 with MD614361.jpg

2023-02-22T18:02:10Z

CrazyModders:

MD614584 MD614691 with MD614361
for comparison

File:MD614406 vs MD614530 compare .jpg

2023-02-22T17:49:27Z

CrazyModders:

MD614406 vs MD614530 compare

Useful links

2023-02-17T11:47:21Z

CrazyModders:

http://www.alflash.com.ua/MMC/TimCon.pdf

https://tech.mirage-performance.com/60mmthrottlebody.html

https://dustrunnersauto.com/mitsubishi-4g92-everything-you-need-to-know/

https://www.mirage-performance.com/tech/ECU/index.html

https://mitsubishi.epc-data.com/

Mitsubishi Manuals

2023-02-16T20:46:22Z

CrazyModders:

This is the sources that i use for manuals when i need info

http://www.lilevo.com/mirage/

http://mmc-manuals.ru/Old_Mitsubishi_Cars

https://w4a33.com/csm/

http://jdmfsm.info/Auto/Japan/Mitsubishi/

http://4g61t.org/archive/Manuals/

https://tech.mirage-performance.com/

https://zinref.ru/avtomobili/Mitsubishi/000.htm

https://tech.mirage-performance.com/

https://evoscan.com/tech-articles/

Later on planing to host all what i will find on this my moderated wiki with online pdf viewer

other links:

https://www.evoscan.com/technical-vehicle-manuals/150-mitsubishi-ecu-numbers

Forums:

http://www.mivec.co.nz/forums/index.php

https://www.zerotohundred.com/forums/

Useful links

2023-02-16T20:40:20Z

CrazyModders:

Rear trailing arms swap to Colt/Lancer/Mirage from Space Star/Carisma

2023-02-16T17:54:39Z

CrazyModders:

As Colt's, Lancer's, Mirage's getting old and not much spare new or used parts available decided to swap rear trailing arms from newer cars.

This came to research that it's possible to use '''Carisma 1 generation, restyling 10.1997 - 10.1999''' and '''Mitsubishi Space Star 1999–2005''' rear trailing arms.

From first look they look similar but have stronger architecture and are easier to find used.

As i was working on Colt CA4A 1991-1995 that had rusted arms and swapped to newer Space Star 1999–2005 arms, Carisma shares sames arms only, did not found any other MMC car that would use these arms.

The difference in situation i got is that Colt was swapped to rear drum brakes from disks, and Colt uses 4x100 lug pattern, and Space Star's and Carisma's mostly 4x114.3 but on my research there where some of them in some markets that was using 4x100.

In short: everything is bolt on, no welding cutting. Just need to use correct parts, that wont mount on this trailing arm, is Wheel hub bearing, as there where two different ones, with 28mm center hole, and 30mm center hole. These trailing arms uses 30mm so if 4x114.3 no works on bearing, if 4x100 then there is need of proper bearing with hub. Second part is upper straight longer arm, will not fit, as carisma and space star has it longer.

This trailing arm swap does not fit AWD as it's only FWD cars.
{| class="wikitable"
|+As looking at the OEM codes of cars for rear trailing/upper arms:
!Model
!trailing arm RH
!trailing arm LH
!Upper long arm RH
!Upper long arm LH
|-
|Mitsubishi Carisma 1 generation, restyling 10.1997 - 10.1999
|MR244924 MR915066
|MR244923 MR915065
|MR130480
|MR130479
|-
|Mitsubishi Space Star 1999–2005
|MR244924 MR915066
|MR244923 MR915065
|MR130480
|MR130479
|}
{| class="wikitable"
|+What cars these Space Star/Carisma arms fit
!Model
!Years
|-
|CARISMA (DA_)
|1995/07 - 1997/09
|-
|COLT IV (CA_A)
|1992/03 - 1996/04
|-
|COLT V (CJ_, CP_)
|1995/09 - 2004/08
|-
|FTO coupe (DE_A)
|1994/09 - 2001/07
|-
|LANCER V (CB_A, CD_A, CE_A)
|1991/07 - 1996/12
|-
|LANCER V Station Wagon (CB_W, CD_W)
|1992/09 - 2003/10
|-
|LANCER VI (CJ_, CP_)
|1995/09 - 2003/12
|-
|MIRAGE IV
|1991/12 - 1996/01
|-
|MIRAGE IV liftback (CJ_A, CL_A, CA_A, CC_A)
|1991/07 - 2003/07
|-
|MIRAGE IV coupe
|1991/12 - 1996/01
|-
|MIRAGE IV sedan
|1991/12 - 1995/08
|-
|MIRAGE V liftback (CJ_A)
|1995/09 - 2003/07
|-
|MIRAGE V sedan (CK_A)
|1995/09 - 2003/07
|-
|Dodge Colt
|1993-1994
|-
|Plymouth Colt
|1993-1994
|-
|Eagle Summit
|1993-1996
|}
This list is interchangeable suspension of all suspension parts, as they share same base. Newer ones have 4 OR 5x114.3 wheel lug pattern older ones have same or 4x100, some of them has rear stabilizer some of them don't.
{| class="wikitable"
|+
This is the most interchangeable parts except the ones I'm swapping here.
|[[File:Mitsubishi-mr297387.jpg|alt=Genuine Mitsubishi (MR297387) |thumb|MR297387]]
|[[File:Mitsubishi-mr297388.jpg|alt=Genuine Mitsubishi (MR297388) |thumb|MR297388]]
|-
|[[File:MR491346 ARM ASSY,RR SUSP,UPR RH MB809221 MB910367.jpg|alt=MR491346 ARM ASSY,RR SUSP,UPR RH MB809221 MB910367|thumb|MR491346 ARM ASSY,RR SUSP,UPR RH MB809221 MB910367]]
|[[File:MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366.jpg|alt=MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366|thumb|MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366]]
|-
|[[File:Mitsubishi-mr197032-one-for-all-big.jpg|alt=Mitsubishi MR197032 one for all big ARM ASSY,RR SUSP,UPR|thumb|Mitsubishi MR197032 one for all big ARM ASSY,RR SUSP,UPR]]
|[[File:Mitsubishi-mr197603 LINK,RR SUSP ASSIST one for all.jpg|alt=Mitsubishi MR197603 LINK,RR SUSP ASSIST one for both sides|thumb|Mitsubishi MR197603 LINK,RR SUSP ASSIST one for all]]
|}
{| class="wikitable"
|+Visual compares of rear trailing arms
![[File:MR244924 MR915066 comapred with MR297388.jpg|alt=MR244924 compared with MR297388|thumb|MR244924 compared with MR297388]]
![[File:MR244924 MR915066 compared with MR297388 top view.jpg|alt=MR244924 MR915066 compared with MR297388 top view|thumb|MR244924 MR915066 compared with MR297388 top view]]
![[File:MR244924 MR915066 compared with MR297388 top view full.jpg|alt=MR244924 MR915066 compared with MR297388 top view full|thumb|MR244924 MR915066 compared with MR297388 top view full]]
|-
|[[File:MR244924 MR915066 compared with MR297388 inner front side.jpg|alt=MR244924 MR915066 compared with MR297388 inner front side|thumb|MR244924 MR915066 compared with MR297388 inner front side]]
|[[File:MR244924 MR915066 compared with MR297388 inner back side.jpg|alt=MR244924 MR915066 compared with MR297388 inner back side|thumb|MR244924 MR915066 compared with MR297388 inner back side]]
|[[File:MR244924 MR915066 inside has extra sheet reinforcements.jpg|alt=MR244924 MR915066 inside has extra sheet reinforcements|thumb|MR244924 MR915066 inside has extra sheet reinforcements]]
|-
|[[File:MR244924 MR915066 compared with MR297388 back view of parts.jpg|alt=MR244924 MR915066 compared with MR297388 back view of parts|thumb|MR244924 MR915066 compared with MR297388 back view of parts]]
|[[File:MR244924 MR915066 bearing hub mount 30mm thick.jpg.jpg|alt=MR244924 MR915066 bearing hub mount 30mm thick|thumb|MR244924 MR915066 MR244923 MR915065 bearing hub mount 30mm thick]]
|[[File:MR297388 MR297387 bearing hub mount 28mm thick.jpg|alt=MR297388 MR297387 bearing hub mount 28mm thick|thumb|MR297388 MR297387 bearing hub mount 28mm thick]]
|}
The Space Star/Carisma rear trailing arms has slightly bigger bent overall and different upper arm bolt hole spot, tried to measure if they change the wheel place but it stays in same place as in Colt, so they don't change wheel alignment of car they are swapped to.

Now going to compare the upper longer arms as these ones are different in length.
{| class="wikitable"
|+
|[[File:MR130479 compared with MR491345 MB809220 MB910366 and MR197032 MR197603.jpg|alt=MR130479 compared with MR491345 MB809220 MB910366 and MR197032 MR197603|thumb|MR130479 compared with MR491345 MB809220 MB910366 and MR197032 MR197603]]
|[[File:MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366 dont fit with MR244923 MR915065.jpg|alt=MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366 dont fit with MR244923 MR915065|thumb|MR491345 MB809220 MB910366 don't fit with MR244923 MR915065]]
|}
So after all when trailing arms with upper lower arms are in place, as seen wheel hub bearing don't mounts on 30mm as it's for 28mm. After researching found that there where MMC models that run 30mm hubs with 4x100 bolt pattern, so here what i got to complete this.

OEM codes of hubs(different car part catalogs show differently) but thsese ones leads to correct ones:

*MB809577 — MITSUBISHI 4x100 30x125 drum/disc
*MR403728 — MITSUBISHI 4x100 30x125 drum/disc
*MB844220 — MITSUBISHI 4x100 30x125 drum/disc
*MR493619 — MITSUBISHI 30 x123 not all
*MR527452 — MITSUBISHI 30 x123 not all

and here are the codes of not OEM parts that fits this 30mm with 4x100 for drum brakes.

*OPTIMAL 952279 Hub assy set 30 x125
*OPTIMAL 952280 Hub assy set 30 x123
*KAVO PARTS WBH-5507 Hub assy set 30 x125
*KAVO PARTS WBH-5508 Hub assy set 30 x123
*BTA H25032BTA Hub assy set 30 x125
*ESEN SKV 29SKV512 Hub assy set 30 x123
*FLENNOR FR941168 Hub assy set 30 x123
*SNR R173.49 Hub assy set 30 x128
*GSP 9230043K Hub assy set 30 x123
*NK 763026 Hub assy set 30 x123
*FEBEST 0482-CKR Hub assy set 30 x125 ?
*FEBEST 0482-CSA43R Hub assy set ?

So once done i realized that this is only difference here between these type of suspensions MMS uses.

Yes there are FTO that runs with 5x114.3 that this might not work.

But from what i experienced doing this swap it's way more better to bolt on this rear trailing arms as they have more play to top and down, so for rally setups it's better.

Places I posted this:

https://www.mirageforums.net/viewtopic.php?f=33&t=56549

https://www.mitsubishi-forums.com/threads/91-04-rear-trailing-arms-swap.262791/

Rear trailing arms swap to Colt/Lancer/Mirage from Space Star/Carisma

2023-02-16T17:52:42Z

CrazyModders:

Rear trailing arms swap to Colt/Lancer/Mirage from Space Star/Carisma

2023-02-16T17:44:30Z

CrazyModders:

As Colt's, Lancer's, Mirage's getting old and not much spare new or used parts available decided to swap rear trailing arms from newer cars.

This came to research that it's possible to use '''Carisma 1 generation, restyling 10.1997 - 10.1999''' and '''Mitsubishi Space Star 1999–2005''' rear trailing arms.

From first look they look similar but have stronger architecture and are easier to find used.

As i was working on Colt CA4A 1991-1995 that had rusted arms and swapped to newer Space Star 1999–2005 arms, Carisma shares sames arms only, did not found any other MMC car that would use these arms.

The difference in situation i got is that Colt was swapped to rear drum brakes from disks, and Colt uses 4x100 lug pattern, and Space Star's and Carisma's mostly 4x114.3 but on my research there where some of them in some markets that was using 4x100.

In short: everything is bolt on, no welding cutting. Just need to use correct parts, that wont mount on this trailing arm, is Wheel hub bearing, as there where two different ones, with 28mm center hole, and 30mm center hole. These trailing arms uses 30mm so if 4x114.3 no works on bearing, if 4x100 then there is need of proper bearing with hub. Second part is upper straight longer arm, will not fit, as carisma and space star has it longer.

This trailing arm swap does not fit AWD as it's only FWD cars.
{| class="wikitable"
|+As looking at the OEM codes of cars for rear trailing/upper arms:
!Model
!trailing arm RH
!trailing arm LH
!Upper long arm RH
!Upper long arm LH
|-
|Mitsubishi Carisma 1 generation, restyling 10.1997 - 10.1999
|MR244924 MR915066
|MR244923 MR915065
|MR130480
|MR130479
|-
|Mitsubishi Space Star 1999–2005
|MR244924 MR915066
|MR244923 MR915065
|MR130480
|MR130479
|}
{| class="wikitable"
|+What cars these Space Star/Carisma arms fit
!Model
!Years
|-
|CARISMA (DA_)
|1995/07 - 1997/09
|-
|COLT IV (CA_A)
|1992/03 - 1996/04
|-
|COLT V (CJ_, CP_)
|1995/09 - 2004/08
|-
|FTO coupe (DE_A)
|1994/09 - 2001/07
|-
|LANCER V (CB_A, CD_A, CE_A)
|1991/07 - 1996/12
|-
|LANCER V Station Wagon (CB_W, CD_W)
|1992/09 - 2003/10
|-
|LANCER VI (CJ_, CP_)
|1995/09 - 2003/12
|-
|MIRAGE IV
|1991/12 - 1996/01
|-
|MIRAGE IV liftback (CJ_A, CL_A, CA_A, CC_A)
|1991/07 - 2003/07
|-
|MIRAGE IV coupe
|1991/12 - 1996/01
|-
|MIRAGE IV sedan
|1991/12 - 1995/08
|-
|MIRAGE V liftback (CJ_A)
|1995/09 - 2003/07
|-
|MIRAGE V sedan (CK_A)
|1995/09 - 2003/07
|-
|Dodge Colt
|1993-1994
|-
|Plymouth Colt
|1993-1994
|-
|Eagle Summit
|1993-1996
|}
This list is interchangeable suspension of all suspension parts, as they share same base. Newer ones have 4 OR 5x114.3 wheel lug pattern older ones have same or 4x100, some of them has rear stabilizer some of them don't.
{| class="wikitable"
|+
This is the most interchangeable parts except the ones I'm swapping here.
|[[File:Mitsubishi-mr297387.jpg|alt=Genuine Mitsubishi (MR297387) |thumb|MR297387]]
|[[File:Mitsubishi-mr297388.jpg|alt=Genuine Mitsubishi (MR297388) |thumb|MR297388]]
|-
|[[File:MR491346 ARM ASSY,RR SUSP,UPR RH MB809221 MB910367.jpg|alt=MR491346 ARM ASSY,RR SUSP,UPR RH MB809221 MB910367|thumb|MR491346 ARM ASSY,RR SUSP,UPR RH MB809221 MB910367]]
|[[File:MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366.jpg|alt=MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366|thumb|MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366]]
|-
|[[File:Mitsubishi-mr197032-one-for-all-big.jpg|alt=Mitsubishi MR197032 one for all big ARM ASSY,RR SUSP,UPR|thumb|Mitsubishi MR197032 one for all big ARM ASSY,RR SUSP,UPR]]
|[[File:Mitsubishi-mr197603 LINK,RR SUSP ASSIST one for all.jpg|alt=Mitsubishi MR197603 LINK,RR SUSP ASSIST one for both sides|thumb|Mitsubishi MR197603 LINK,RR SUSP ASSIST one for all]]
|}
{| class="wikitable"
|+Visual compares of rear trailing arms
![[File:MR244924 MR915066 comapred with MR297388.jpg|alt=MR244924 compared with MR297388|thumb|MR244924 compared with MR297388]]
![[File:MR244924 MR915066 compared with MR297388 top view.jpg|alt=MR244924 MR915066 compared with MR297388 top view|thumb|MR244924 MR915066 compared with MR297388 top view]]
![[File:MR244924 MR915066 compared with MR297388 top view full.jpg|alt=MR244924 MR915066 compared with MR297388 top view full|thumb|MR244924 MR915066 compared with MR297388 top view full]]
|-
|[[File:MR244924 MR915066 compared with MR297388 inner front side.jpg|alt=MR244924 MR915066 compared with MR297388 inner front side|thumb|MR244924 MR915066 compared with MR297388 inner front side]]
|[[File:MR244924 MR915066 compared with MR297388 inner back side.jpg|alt=MR244924 MR915066 compared with MR297388 inner back side|thumb|MR244924 MR915066 compared with MR297388 inner back side]]
|[[File:MR244924 MR915066 inside has extra sheet reinforcements.jpg|alt=MR244924 MR915066 inside has extra sheet reinforcements|thumb|MR244924 MR915066 inside has extra sheet reinforcements]]
|-
|[[File:MR244924 MR915066 compared with MR297388 back view of parts.jpg|alt=MR244924 MR915066 compared with MR297388 back view of parts|thumb|MR244924 MR915066 compared with MR297388 back view of parts]]
|[[File:MR244924 MR915066 bearing hub mount 30mm thick.jpg.jpg|alt=MR244924 MR915066 bearing hub mount 30mm thick|thumb|MR244924 MR915066 MR244923 MR915065 bearing hub mount 30mm thick]]
|[[File:MR297388 MR297387 bearing hub mount 28mm thick.jpg|alt=MR297388 MR297387 bearing hub mount 28mm thick|thumb|MR297388 MR297387 bearing hub mount 28mm thick]]
|}
The Space Star/Carisma rear trailing arms has slightly bigger bent overall and different upper arm bolt hole spot, tried to measure if they change the wheel place but it stays in same place as in Colt, so they don't change wheel alignment of car they are swapped to.

Now going to compare the upper longer arms as these ones are different in length.
{| class="wikitable"
|+
|[[File:MR130479 compared with MR491345 MB809220 MB910366 and MR197032 MR197603.jpg|alt=MR130479 compared with MR491345 MB809220 MB910366 and MR197032 MR197603|thumb|MR130479 compared with MR491345 MB809220 MB910366 and MR197032 MR197603]]
|[[File:MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366 dont fit with MR244923 MR915065.jpg|alt=MR491345 ARM ASSY,RR SUSP,UPR LH MB809220 MB910366 dont fit with MR244923 MR915065|thumb|MR491345 MB809220 MB910366 don't fit with MR244923 MR915065]]
|}
So after all when trailing arms with upper lower arms are in place, as seen wheel hub bearing don't mounts on 30mm as it's for 28mm. After researching found that there where MMC models that run 30mm hubs with 4x100 bolt pattern, so here what i got to complete this.

OEM codes of hubs(different car part catalogs show differently) but thsese ones leads to correct ones:

* MB809577 — MITSUBISHI 4x100 30x125 drum/disc
* MR403728 — MITSUBISHI 4x100 30x125 drum/disc
* MB844220 — MITSUBISHI 4x100 30x125 drum/disc
* MR493619 — MITSUBISHI 30 x123 not all
* MR527452 — MITSUBISHI 30 x123 not all

and here are the codes of not OEM parts that fits this 30mm with 4x100 for drum brakes.

* OPTIMAL 952279 Hub assy set 30 x125
* OPTIMAL 952280 Hub assy set 30 x123
* KAVO PARTS WBH-5507 Hub assy set 30 x125
* KAVO PARTS WBH-5508 Hub assy set 30 x123
* BTA H25032BTA Hub assy set 30 x125
* ESEN SKV 29SKV512 Hub assy set 30 x123
* FLENNOR FR941168 Hub assy set 30 x123
* SNR R173.49 Hub assy set 30 x128
* GSP 9230043K Hub assy set 30 x123
* NK 763026 Hub assy set 30 x123
* FEBEST 0482-CKR Hub assy set 30 x125 ?
* FEBEST 0482-CSA43R Hub assy set ?

So once done i realized that this is only difference here between these type of suspensions MMS uses.

Yes there are FTO that runs with 5x114.3 that this might not work.

But from what i experienced doing this swap it's way more better to bolt on this rear trailing arms as they have more play to top and down, so for rally setups it's better.