Difference between revisions of "Colt/Lancer/Summit/Proton front disk brakes upgrade 276mm"
CrazyModders (talk | contribs) |
CrazyModders (talk | contribs) |
||
| Line 23: | Line 23: | ||
{| class="wikitable" | {| class="wikitable" | ||
!Make of car, model, type | !Make of car, model, type | ||
| − | ! | + | !Engine power KW |
!CCM | !CCM | ||
!HP | !HP | ||
| Line 93: | Line 93: | ||
{| class="wikitable" | {| class="wikitable" | ||
!Make of car, model, type | !Make of car, model, type | ||
| − | ! | + | !Engine power KW |
!CCM | !CCM | ||
!HP | !HP | ||
Latest revision as of 00:32, 8 September 2021
Upgrading your 1.3 1.5 1.6 1.8 ... Colt/Lancer/Mirage/Summit/Proton ... front disk brakes from 236mm, 256mm to big 2 pot brakes 276mm or even 296mm
Most 1.3 1.5 1.6 petrol engines have 236mm front disks that are weak for heavy load
1.8 has 256mm bigger disk brakes that are quite good but still on heavy load overheats
tested 276mm front disk brakes works on extreme load as these models are not heavy cars
236mm disk brakes fits R13 wheels
256mm R14 minimum
276mm R15 minimum
296mm R16 minimum(some R15 rims might fit if caliper bracket grinded bit)
so you have to decide before upgrading if you have acceptable size rims to run your car
this upgrade does not require any modifications(bot on) if you use proper parts if not you will have to re-drill holes and make centering rings
To bolt on 256mm for 4x100 wheels bolt pattern you need to get front discs, calipers, brackets, pads from:
| Make of car, model, type | Engine power KW | CCM | HP | Date of production |
|---|---|---|---|---|
| MITSUBISHI | ||||
| MITSUBISHI COLT IV (CA_A) 1.8 GTi 16V (CA5A) | 103 KW | 1834 CCM | 140PS | 1992/04->1996/04 |
| MITSUBISHI LANCER IV Hatchback (C6_A, C7_A) 1.8 GTi 16V (C69A) | 103 KW | 1834 CCM | 140PS | 1992/06->1993/12 |
| MITSUBISHI LANCER V (CB_A, CD_A, CE_A) 1.8 16V (CB5A) | 103 KW | 1834 CCM | 140PS | 1992/06->1993/12 |
| MITSUBISHI LANCER V (CB_A, CD_A, CE_A) 1.8 GTi | 100 KW | 1834 CCM | 136PS | 1991/07->1993/07 |
| PROTON | ||||
| PROTON PERSONA 300 (C9_M) 318 16V GTI | 99 KW | 1834 CCM | 135PS | 1996/03->2000/07 |
| PROTON PERSONA 400 (C9_S) 1.8 | 99 KW | 1834 CCM | 135PS | 2000/08->2001/12 |
| PROTON PERSONA 400 (C9_S) 418 | 85 KW | 1834 CCM | 115PS | 1996/05->2000/07 |
| PROTON PERSONA 400 Hatchback (C9_C, C9_S) 1.8 | 99 KW | 1834 CCM | 135PS | 2000/08->2001/12 |
| PROTON PERSONA 400 Hatchback (C9_C, C9_S) 418 GLXi | 85 KW | 1834 CCM | 115PS | 1996/05->2000/07 |
Looking at the list so you see that most of the cars had 4G93 engine an 4x100 wheel lug pattern. Means that you will bolt on this upgrade on any CMS car.
But this upgrade does not fit on cars with other Mitsubishi lug pattern.
AND there is list of cars where you can get 256mm brakes upgrade, but you will need to re-drill holes and make centering rings.
| Make of car, model, type | Engine power KW | CCM | HP | Date of production |
|---|---|---|---|---|
| MITSUBISHI | ||||
| MITSUBISHI ECLIPSE I (D2_A) 2.0 i 16V (D22A, D27A) | 110 KW | 1997 CCM | 150PS | 1991/04->1995/11 |
| MITSUBISHI ECLIPSE II (D3_A) 2000 GS 16V (D32A) | 107 KW | 1997 CCM | 146PS | 1995/12->1999/04 |
| MITSUBISHI GALANT VII (E5_A, E7_A, E8_A) 2.0 GLSTD (E57A) | 66 KW | 1998 CCM | 90PS | 1992/11->1996/08 |
| MITSUBISHI GALANT VII (E5_A, E7_A, E8_A) 1.8 GLSI (E52A) | 93 KW | 1834 CCM | 126PS | 1992/11->1996/08 |
| MITSUBISHI GALANT VII (E5_A, E7_A, E8_A) 1.8 (E52A) | 85 KW | 1834 CCM | 116PS | 1994/02->1996/08 |
| MITSUBISHI GALANT VII Saloon (E5_A, E7_A, E8_A) 2.0 GLSTD (E57A) | 66 KW | 1998 CCM | 90PS | 1992/11->1996/08 |
| MITSUBISHI GALANT VII Saloon (E5_A, E7_A, E8_A) 1.8 GLSI (E52A) | 93 KW | 1834 CCM | 126PS | 1992/11->1996/08 |
| MITSUBISHI GALANT VII Saloon (E5_A, E7_A, E8_A) 1.8 (E52A) | 85 KW | 1834 CCM | 116PS | 1994/02->1996/08 |
| MITSUBISHI LANCER IV Hatchback (C6_A, C7_A) 1.8 GTi 16V (C69A) | 103 KW | 1834 CCM | 140PS | 1992/06->1993/12 |
and there are JDM cars
we have covered the upgrade to 256mm brakes it might be not totally full info, there might be models that had these brakes but i have missed.
OEM part codes for spare parts:
| Part code | Name |
| MB928408 | CALIPER KIT, FR BRAKE, LH |
| MB928409 | CALIPER KIT, FR BRAKE, RH |
| MR389533 | PAD SET,FR BRAKE |
| MR389597 | CLIP SET, FR BRAKE |
| MB699263 | SUPPORT, FR BRAKE CALIPER, LH |
| MB699263 | SUPPORT, FR BRAKE CALIPER, LH |
| MB699285 | DISC, FR BRAKE |
------------------------------------------------------------------------------------------------------------------------------------------------
Mitsubishi Mirage CyborgR
| Model (code) | Engine power HP | CCM capacity | Engine power KW | Engine code | Period of production |
|---|---|---|---|---|---|
| MITSUBISHI GALANT VI Estate (EA_) 2.5 V6 24V (EA5W) | 163PS | 2498 CCM | 120 KW | 6A13 | 1996/09->2000/09 |
| MITSUBISHI GALANT VI Estate (EA_) 2.5 V6 24V (EA5W) | 160PS | 2498 CCM | 118 KW | 6A13 | 2000/09->2003/10 |
| MITSUBISHI LANCER V (CB_A, CD_A, CE_A) EVO I (CD9A) | 250PS | 1997 CCM | 184 KW | 4G63 Turbo | 1992/10->1993/12 |
| MITSUBISHI LANCER V (CB_A, CD_A, CE_A) EVO II (CE9A) | 261PS | 1997 CCM | 192 KW | 4G63 Turbo | 1994/01->1995/07 |
| MITSUBISHI LANCER V (CB_A, CD_A, CE_A) EVO III (CE9A) | 269PS | 1997 CCM | 198 KW | 4G63 Turbo | 1995/08->1996/07 |
To bolt on for 5x114,3 wheels bolt pattern you need to get front disks from:
Sources:
4x100 front and rear disc upgrade - This thread gives us a few options for larger discs on the front (276mm/10.87") and a rear (259mm/10.19") disc conversion
